Sigint Solutions
 

 

HEG10 Stainless Steel Gauze

 heg10 stainless steel gauze
HEG10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.







Request Quote



Technical Data

  • Width: 100 cm
  • Length: By the meter / 25 m roll
  • Attenuation: 42 dB, two-layer 54dB
  • Weight: 260 g/m²
    Color: Silver
    Mesh width:1.0 mm,wire diameter:0.16 mm
  • Material thickness: 0.32 mm, open area 74%
  • Fire-proof material, A1 according DIN4102:1994
  • Surface conductivity: 0.1 ohm (square resistance)



Screening attenuation

 
The shielding attenuation is regularly tested in our own laboratory or by Professor Dipl.Ing. Pauli at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935-10 and/or IEEE-STD-299-2006.


Grounding


Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our grounding stainless steel tape ELB for application under-plaster or in drywall constructions



Material Application

In case processing the HEG10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the HEG10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.