Sigint Solutions
 

 

ESW Grounding Set

 yshield-esw
Grounding set for shielding paints, nettings, fleeces, etc. in the
interior.









Request Quote



Description

The ESW Grounding set is used for shielding paints, nettings, fleeces, etc. in the interior. For each continuous connected area (or per room), one grounding set is required! When required, the 2 grounding sockets can be connected to our grounding cables EK can be connected for floor mats, canopies, etc.

One ESW grounding set is needed for each continuous connected area (per room).

Technical Data

  • Metal plate 80 x 80 x 3 mm with conductive fleece backside;
  • 3 grounding sockets; 4 cable fixers;
  • Screws, dowels / wall plugs ø 6 mm;
  • 1 m grounding cable ø 2.5 mm² pre-assembled (for longer cables see our grounding cables EK)

 



Material Application

  1. Mounting at an easily accessible point, close to the final ground connection.
  2. Drill 6 mm holes. Make sure you do not drill cables in the proximity of power outlets and switches
  3. For shielding paints: Stick grounding strap EB2 as shown under „Grounding straps“. Paint the area with the shielding paints as recommended in the corresponding technical data sheet. After drying, apply a second coat under and around the plate. Let it dry.
  4. For nettings, fleeces: Stick grounding strap EB as shown under „Grounding straps“. Adhere the materials on the area with some overlap as recommended in the corresponding technical data sheets. Our dispersion glue DKL90 is electrically conductive, why there is a low electrical resistance after drying, which is necessary for proper grounding. This also applies to various wallpaper paste, but there is no guarantee on that! Let it dry. Drill out holes again.
  5. Insert dowels and screw down the plate tightly.
  6. Mask the grounding plate, it is not allowed to overpaint it! Overpaint the area with commercial wall paints, wallpapers or use fine plaster as recommended in the corresponding technical data sheets.
  7. Press down the grounding plug tightly. Fix it with a cable tie. Alternatively install own cables 2.5-4 mm² with the included terminal lugs.