Sigint Solutions
 

 

EB3 Grounding Strap

 yshield-eb3
Self-adhesive fleece with electrically conductive glue.










Request Quote



Description

Self-adhesive fleece with electrically conductive glue. Identical to EB1 but with a width of 10 cm. Application similar to grounding straps EB1 or EB2 if a higher leakage current or a larger contact area is needed or as self-adhesive fleece for shielding small areas of cables, slots, notches, openings, cables, etc. in measuring cabines or experimental setups. On basis of our fleece HNV80 with 80 dB!


Technical Data

 

  • Width: 10 cm.
  • Length: By the meter.
  • Attenuation: 80 dB at 1 GHz.
  • Self-adhesive with an electrically conductive glue.
  • Adhesive force: 3 N/cm.
  • Material thickness: 0.15 mm.
  • Color: Anthracite / Brown.
  • Tensile strength: Very good in both directions, 50 N/mm.
  • Materials: Nylon, copper, nickel, protection coating.

 

Material Application

 

  1. The glue on EB is electrically conductive. Therefore the EB can be sticked under and onthe materials. Application under and on nettings, fleeces to connect the limited width of material. With an adhesive force of 3N/cm, it sticks relatively poor on difficult undergrounds (e.g. plasterboards). Use a primer first!
  2. The glue on EB2 is electrically non-conductive. Therefore the EB2 can be sticked only under the materials. Application under shielding paints to bridge cracks in the underground. With an adhesive force of 10 N/cm it sticks very well even on difficult undergrounds.

yshield-groundstraps

The grounding straps must be pressed down tightly to adapt perfectly to the underground.
Mounting: Cross all areas once and connect them with each other, starting from ESW (EPW). The strap can be sticked under the baseboard e.g. if there are no doors.